Titanium rod filter purification process

Update:15 Nov 2019

The variable gap design that does not use the horizontal distribution of the filter media through the grain diameter is true, the suspension and colloid tell the deep bed filter device that the impurities are intercepted on the surface of the filter device and the pores are intercepted on the surface of the filter layer. The secondary filtration equipment suspends the real and colloidal impurities, the impurities in the wear rheology gap stone production and the flocculation gel effect increase the small particle removal rate can be converted to access the faucet or trial compressed air backwash, easy to operate titanium rod filter device housing body Materials selected for carbon steel or stainless steel lining anti-corrosion coatings, smaller filters can also be selected for outsourced PP tube fiberglass filter operation to break up, mechanical control and systems, such as program control.
1, titanium rod filter with high precision: the solids removal rate of suspended solids with particle size greater than 5 μ m is 90%~ 95%, the water turbidity is much lower than the sand filter, and the high speed can be adjusted.
2, screening: filtration rate up to 20 ~ 60 M / h sand filter is 3 times, it covers much less than sand filter
3, Titanium rod filter interception capacity: more than 20 kg / m3, is 4 times sand filter
4, low self-consumption water consumption. Only 0.5 ~ 1% for production
5, automatically adjust the filter density.. Filtering highly automated matching process, no external mechanical power
6, titanium rod filter floating plate without obstruction.. can ensure that the floating panel will not appear twisted jamming phenomenon

0