Water purifier is a very popular product on the market today. Many consumers choose to install it for the health of drinking water of their families, especially families with elderly people, children, and pregnant women. Get more at ease. However, during the process of use, many friends found that the water output was smaller than when they were first used. What is going on?
In this case, the editor of Jialeshi reminds you not to be in a hurry, to see if there are any problems in these areas, and then to decide whether to call for repairs.
1.Check the water pressure
If it is found that the water output becomes small, first check whether the tap water pressure is normal and whether the inlet water pressure meets the requirements of the water purifier. If you check the water pressure is relatively low, you can install a booster pump to solve the problem. This kind of water purifier has a smaller water outlet because of the water pressure problem, which is more common in old communities.
2.Check the filter element
The tap water often contains large particles such as sediment. After the water passes through the filter of the water purifier, it gradually accumulates, which will block the filter and reduce the amount of water output. At this time, you can check the use of the filter element, clean or replace it.
The water purifier is different from other home appliances. Its internal filter element for filtering water must be replaced regularly, otherwise the filter element used for a long time will not have the effect of purifying water. If it is not replaced in time, the pollutants adsorbed in the filter element will still be It may cause secondary pollution of drinking water, so you can't be lazy after installing the water purifier, and you need to maintain it later.
The replacement cycle of the filter element is generally based on the quality of the filter element, the quality of the filtered water, and the amount of filtered water. Some machines will have a direct prompt on the screen. Which filter element should be replaced, just replace it according to the prompts.
If you find that the amount of water produced in your home is significantly reduced and the taste is worse, you need to consider whether the filter element should be replaced. In addition, in order to extend the service life of the filter element, a pre-filter can be installed at the household water to carry out the preliminary filtration of the tap water and reduce the filtering burden of the later filter element.
