1. Collision avoids scratches, dust and grease.
2. When working pressure should not exceed the rated working pressure.
3. In normal use, the titanium rod filter has a low voltage starting time of at least 3-5 minutes. Their relative differential pressure should be controlled below 0.5 mpa, and then gradually transferred to the normal working pressure (maximum pressure does not exceed 0.4Mpa) . Of this product
4. After a period of time, it may be due to the clogging of the filter element, resulting in reduced pressure and flow, which requires backwashing or backwashing naturally. The regeneration cycle is used as the rated pressure and flow.
5. The quartz sand filter plate and cylinder handle all parts reasonably. The processing steps of the air reverse link are particularly important. In order to eliminate the image of the filter plate and cylinder gap caused by errors such as filter plate processing and cylinder winding, segmented ring plate welding is usually used, and the contact area must be fully welded. The radial gap center tube and filter plate treatment method is also similar.
