Titanium rod filters use titanium powder sintered cartridges, typically used in coarse filters or filters. This filter has high precision, high temperature resistance, corrosion resistance and high mechanical strength. It is widely used in the pharmaceutical industry, shell material 316l or 304 stainless steel. GMP compliant. This filter device uses a stainless steel casing, internal filter titanium tube, has a light texture, high temperature resistance, high pressure, and acid, alkali and corrosion resistance, the filter can be repeatedly used, function, powder metallurgy using titanium metal Powder is not treated by high temperature sintering by hollow filter tubes, it is widely used for food and beverage and pharmaceutical, chemical, industrial solid-liquid separation, especially in the pharmaceutical industry for large infusion and injection line closed carbon filter. This series of fast-loading connections that have been manufactured in accordance with GMP standards for compact art production and international use of pipe connections are easy to disassemble and clean. Cleaning method: Titanium rod filter used for a period of time, there will be a certain degree of traffic congestion, reduced flow filter front end pressure, such as: from 0.22mPa to 0.3 mpa or less, more time cleaning filter cleaning method is as follows: 1 is The new cartridge, the general purpose water recoil rear seat is used to clean the natural gas, which is slightly larger than the working (such as 0.3 mpa) pressure water cleaning in the opposite direction. The kickback time is approximately 1-3 minutes. 2 After many backwashing, the filter effect is not significantly rebounded. Free 5% or 10% naoh solution in 5% hydrochloric acid or sulfuric acid solution is soaked at room temperature, then washed with water.