Titanium rod filter works

Update:12 Oct 2019

The working pressure of the titanium rod filter should not exceed the rated working pressure during use. In normal use, there is at least 3-5 minutes of low-pressure start-up time, the relative pressure difference should be controlled below 0.5Mpa, and then the working pressure is gradually adjusted to normal needs (the highest pressure does not exceed 0.7Mpa). After the operation reaches a certain period of time, the pressure of the filter element may be blocked due to blockage of the filter element, and backflushing or backwash regeneration is required.
The regeneration cycle depends on the rated pressure and flow rate. Titanium rod filter can remove the discoloration, odor and mercury, lead, cadmium, zinc, iron, manganese, chromium and other heavy metals in the water, and remove the arsenic, hydride, sulfide, residual chlorine and other polymers in the clear water. Compounds and radioactive materials such as thorium and radium remove and kill bacteria and E. coli and other carcinogens in water.
It is an ideal water supply equipment for drinking water, food, beverage, pharmaceutical, chemical and other industrial purified water. The activated carbon filter has a simple structure and convenient operation and maintenance. Applicable to food, beverage, chemical and other enterprises and institutions with high water quality requirements, also applied to restaurants, hotels, troops, stations, terminals. Water supply equipment for industrial and domestic use.

0